Solutions » Introduction to Solutions by Issue » Proposal for the use of booster regulators to reduce pneumatic line pressure
- Energy Saving
- By Industry ⁄ Process
- Applications
|Proposal for the use of booster regulators to reduce pneumatic line pressure
--
- Local pressure increase only where high pressure is required, thereby reducing overall factory pressure
- Application examples of local pressure increase
Energy Saving, Exhaust-Recovery Booster Regulator VBAE
Booster Regulators ? Booster Regulators
-
?CO2 emissions (Air consumption): Max. 40% reduction (Based on SMC's
measuring conditions)
Driven by reusing the exhaust air
?Increase factory air pressure by 1.7 times
Air-only operation that requires no power supply, and allows for easy
installation.
?Operation noise: 65 dB (A)
15 dB (A) reduction compared with the existing model (VBA series) (Based
on SMC's measuring conditions)
?Charging time: Max. 50% shorter
?Operating cycles: 50 million cycles or more
Reduced maintenance frequency due to improved life (Based on SMC's
test conditions)
?Compatible with vertical and horizontal installation
?Mounting interchangeability with the existing model (VBA series)
| Series | Port size | Set pressure (MPa) |
|---|---|---|
| VBAE | 1/4，1/2 | 0.3 to 1.2 |
Booster Regulator VBA10A/11A
Modular F.R.L./Pressure Control Equipment ? Booster RegulatorsBooster Regulators ? Booster Regulators
-
?Increase factory air pressure by 4 times!
?Air-only operation requires no power supply, and allows easy installation.
?Air consumption: Max. 25% reduction (Pressure increase ratio: Twice),
Max. 30% reduction (Pressure increase ratio: 4 times)
?Max. flow rate: 10% increase (Pressure increase ratio: Twice),
30% increase (Pressure increase ratio: 4 times)
?Charging time: Max. 30% shorter (Pressure increase ratio: Twice),
Max. 60% shorter (Pressure increase ratio: 4 times)
?Improved service life: 50 million cycles or more
(Pressure increase ratio: Twice, 4 times)
Maintenance frequency is reduced due to improved life.
| Series | Port size | Set pressure (MPa) |
|---|---|---|
| VBA-X3239 | 1/4 | VBA10A： 0.4 to 1.4 VBA11A： 0.8 to 2.0 |
